Filter
Top Products
4 Replacement Procedures
Installing the Expansion Memory
CAUTION: Do not touch the connectors on the expansion memory or on the computer.
Debris on the connectors may cause memory access problems.
Follow these steps to install a memory module:
1. Set the computer to boot mode and turn off the power.
2. Remove all cables connected to the computer.
3. Turn the computer upside down and remove the battery.
4. Loosen the three embedded M2.5x6 screws securing the memory module socket cover.
5. Slide your fingernail or a thin object under the cover and lift it off.
Figure 4-12 Removing the expansion memory cover
6. Fit the module's connectors into the computer's connectors at about a 45-degree angle and
press the module carefully to ensure a firm connection.
4-18 Satellite P30 Series Maintenance Manual