Filter
Top Products
4 Replacement Procedures
4-30 Satellite P30 Series Maintenance Manual
2. Turn the computer upside down and remove twelve black M2.5x18 screws and four black
M2.5x5 screws securing the bottom half of the cover:
Figure 4-23 Removing the top cover-2
3. Detach the upper FFC cable (A).
4. Remove the top cover.
Installing the Top Cover
To install the top cover, follow the steps below and refer to the figures in the preceding section.
1. Seat the top cover and secure the upper FFC cable.
2. Secure the top cover with two black M2.5x18 black screws and four black M2.5x3 screws.
3. Turn the computer upside down and secure twelve black M2.5x18 screws and four black
M2.5x5 screws.