Filter
Top Products
4 Replacement Procedures
4.13 Touch Pad
Removing the Cover
To remove the Touch Pad, first remove the top cover, then follow the steps below:
1. Remove the two black M2.5x3 screws securing Touch Pad LED board FFC cable to the
Touch Pad, and then detach it.
Note: One screw is under the mylar flap.
2. Remove one M2.5x3 screw securing the Touch Pad Bracket and then slide it out.
Figure 4-24 Removing the Touch Pad LED board
Satellite P30 Series Maintenance Manual 4-31