Filter
Top Products
4 Replacement Procedures
4.14 Speakers
Removing the Speakers
To remove the speakers, first remove the top cover, then follow the steps below:
1. Disconnect the right and left speaker cables from the system board.
Figure 4-26 Removing the speakers
2. Remove two special screws securing each speaker into place.
3. Lift out the speakers.
Installing the Speakers
To install the speakers, follow the steps below and refer to the figure in the preceding section:
1. Seat each speaker.
2. Secure each speaker with two special screws.
3. Attached the left and right speaker cables to the system board.
Satellite P30 Series Maintenance Manual 4-33