Filter
Top Products
4 Replacement Procedures
4-34 Satellite P30 Series Maintenance Manual
4.15 System Board
Removing the System Board
To remove the system board, first remove the LCD display assembly and the top cover, then
follow the steps below:
1. Remove the three black M2.5x5 screws securing the system board to the bottom cover.
Figure 4-27 Removing the system board
2. Remove the two silver hex screws securing the system board to the back chassis.
Figure 4-28 Removing the hexagonal screws
3. Pry the backside of the chassis out, then remove the system board.