Filter
Top Products
4 Replacement Procedures
Satellite P30 Series Maintenance Manual 4-41
4.18 LCD Module
Removing the LCD Module
To remove the LCD module, first remove the display assembly and display mask, then follow the
steps below.
1. Remove one black M2x3 screw securing the FL inverter board and one black M2.5x3 screw
securing the LCD cable.
2. Disconnect the LCD cable from the FL inverter board.
3. Remove six M2.5x5 black screws securing the LCD module bracket to LCD cover.
Figure 4-34 Removing the LCD module-1
4. Remove eight M2x3 screws securing LCD module bracket to the LCD module.