Filter
Top Products
Test and Diagnostic Operation
2.1. Config Check Test
The config check test checks unit configuration. It includes:
CPU type
System memory size
ODD type
HDD type & capacity
BIOS version
This test needs input unit Part Number by manual to make comparison with known SKU data.
NOTE: To execute this test, you must input unit Part Number as “Uppercase Character”.
Then it will show its configuration is correct (in green color) or failed (in red color).
The screen should display as below, indicating whether the test is passed or failed after
comparison.
3-6 Satellite P30 Series T&D Operation Handbook