Filter
Top Products
User’s Manual 4-16
Operating Basics
■ Slot ODD
To load disc, follow the steps as listed below and refer to following figures.
1. When the computer's power is on, insert a disc into the ODD directly.
Removing discs
■ Tray ODD
To remove the disc, follow the steps as detailed below:
1. To pop the disc tray partially open, press the eject button. Gently pull
the disc tray out until it is fully opened.
2. The disc extends slightly over the sides of the disc tray so you can
grasp it. Gently lift out the disc.
Do not press the eject button while the computer is accessing the media
drive. Wait for the optical disc drive indicator to go out before you open the
disc tray. Also, if the disc is spinning when you open the disc tray, wait for it
to stop before you remove it.
When the disc tray pops open slightly, wait a moment to make sure the
disc has stopped spinning before pulling the disc tray fully open.