doctor. Do not touch the battery fluid on instruments or devices with bare
hands. Wipe off with a cloth or paper towel.
When the battery shipped with the Remote Controller is discharged,
replace it with commercially available CR2032 battery. Other types of
battery should not be used.
Installing and replacing the battery
1. Open the battery cover on the back side of the remote controller.
2. Slide the battery out of battery case.
Figure 3-9 Installing/Replacing the battery
RC6
ir
Made in China
MCE IR Remote Control
Model: G83C000BF116
1x 3V CR2032 Lithium battery
3. Insert the new battery in place. Be sure to place the battery with
correct polarities. Push it forward to fit into the battery case.
4. Close the battery cover securely.
Internal Hardware Components
This section describes the internal hardware components of your computer.
The actual specifications may vary depending on the model you
purchased.
CPU The processor type varies depending on model.
To check which type of processor is included in
your model, open the TOSHIBA PC Diagnostic
Tool Utility by clicking Desktop -> Desktop
Assist (in taskbar) -> Support & Recovery ->
PC Diagnostic Tool.
Legal Footnote (CPU)
For more information regarding CPU, please refer to the Legal Footnotes
section.
User's Manual 3-16