Filter
Top Products
154
Enhancing Productivity
Inserting and removing hard drives
5.375 x 8.375 ver 2.3
TECHNICAL NOTE: Use amplified speakers that require an
external power source. Other types of speakers will be
inadequate to produce sound from the computer.
To play back sound files through external speakers or
headphones:
1 Locate the headphone jack on the computer.
2 Using any necessary adapters, plug the cable from the
headphones or external speakers into the headphone jack.
The headphone jack requires a 16-ohm stereo mini-jack.
To adjust the volume:
❖ For external speakers, use the volume controls on each
speaker.
❖ For headphones, use the computer’s volume control dial.
Inserting and removing hard drives
Your Tecra
®
A2 can use various hard drive capacities.
Depending upon the original hard drive installed in your
computer, you may wish to increase storage capacity by
changing the internal drive.
To change the internal hard drive:
1 Shut down your computer completely using the Shut Down
command. See “Powering down the computer” on page 106.
2 Unplug the computer.
3 Close the display panel and remove any cables you may
have connected.
4 Turn the computer upside down.
5 Remove the screw on the hard drive cover.