Filter
Top Products
Chapter 4 Replacement Procedures
5. Remove the following screws securing the HDD holder and remove the HDD holder.
M3.03.5F FLAT BIND screw x4
M3×3.5
Figure 4-3-3 Remove HDD
Installing HDD-H9.5mm
The following describes the procedure for installing the main HDD.
1. Install a HDD to the HDD holder and secure it with the following screws.
M3.03.5F FLAT BIND screw x4
NOTE: Although they are 3mm head screws, screw torque must be set in 2.5kgf-cm for
four screws securing the HDD holder.
2. Connect HDD carefully to the HDD cable
3. Insert the HDD assembly with HDD cable into the HDD slot.
4. Secure the HDD assembly with the following screw.
M2.04.0F FLAT BIND screw x4
Satellite T110D / Satellite Pro T110D / PORTEGE T110DMaintenance Manual (960-Q08)
13