Filter
Top Products
Chapter 4 Replacement Procedures
4.11 I/O Boards
Removing I/O Boards
The following describes for removing the I/O boards (See Figure 4-11-1 and Figure 4-11-2).
1. Disconnect HDMI FFC, Audio FFC and LAN FFC from I/O boards’ connectors.
2. Remove below screws and then incline pull out I/O Boards (CRT board, HDMI board,
Audio board and LAN board)
3. Disconnect the CRT cable, Speaker cable from I/O boards’ connectors.
Figure 4-11-1 Positions of I/O boards
M2.0x3F FLAT BIND screw x6
M2.0x4F FLAT BIND screw x1
Satellite T110D / Satellite Pro T110D / PORTEGE T110D Maintenance Manual (960-Q08)
38