Filter
Top Products
Chapter 4 Replacement Procedures
4.14 LCD unit
Removing the LCD unit
The following describes the procedure for removing the LCD unit (See Figure 4-14-1 to 4-
14-4).
1. Remove Screw MYLAR cover x4
2. Remove the following screws securing the display mask
M2.04.0F FLAT BIND screw x4
3. Insert your finger between the edge of the display mask and the LCD, and remove the
display mask while releasing the latches of display mask. (Note: when removing the
display mask, please first remove from top side to the bottom in order to lessen the
degree of breaking.
Figure 4-14-1 Remove the display mask
4. Remove the following screws securing the LCD unit, and disconnect CCD FPC
M2.03.0F FLAT BIND screw x4
Satellite T110D / Satellite Pro T110D / PORTEGE T110D Maintenance Manual (960-Q08)
4
7