Filter
Top Products
Power and PowerUp Modes
Portégé M200 613
Portégé M200 Version
1
Last Saved on 03/11/2003 12:04
ENGLISH using Euro_M.dot –– Printed on 03/11/2003 as IM_M20EN
Installing the Battery Pack
To install a Battery Pack, follow the steps below.
The Battery Pack is a lithiumion battery, which can explode if not properly
replaced, used, handled or disposed of. Dispose of the battery as required
by local ordinances or regulations. Use only batteries recommended by
TOSHIBA as replacements.
1. Be sure the computer’s power is off and all cables are disconnected.
2. Inserts calmly until the battery pack in the connector aslant and there
until it clicks.
3. Secure the battery lock.
BATTERY LOCK
Installing the Battery Pack