Filter
Top Products
Power and PowerUp Modes
Portégé M200 617
Portégé M200 Version
1
Last Saved on 03/11/2003 12:04
ENGLISH using Euro_M.dot –– Printed on 03/11/2003 as IM_M20EN
Power-up modes
The computer has the following powerup modes:
■ Boot: Computer shuts down without saving data. Always save your
work before you turn the computer off in boot mode.
■ Hibernation: Data in memory is saved to the hard disk.
■ Standby: Data is maintained in the computer’s main memory.
Refer also to the sections Turning on the power and Turning off the power
in Chapter 3, Getting Started.
Windows utilities
You can specify the setting in TOSHIBA Power Saver.
Hot keys
You can use hot keys Fn + F3 to enter Standby mode and Fn + F4 to
enter Hibernation. See Chapter 5, The Keyboard for details.
Panel power off
You can set up your computer so that power turns off automatically when
you close the display panel. When you open the panel, power turns on in
Standby or Hibernation mode but not in boot mode.
However, when the system is running in the tablet mode, it does not shut
down even if the display panel is closed.
If the panel power off function is enabled and you use Shut down
Windows, do not close the display until the shut down function is
completed.
System Auto Off
This feature turns the system off automatically if the computer is not used
for a set duration. The system shuts down in Standby mode or
Hibernation mode in Windows.
However, when the system is running in the tablet mode, it does not shut
down even if the display panel is closed.