Filter
Top Products
Troubleshooting
Portégé M200 95
Portégé M200 Version
1
Last Saved on 03/11/2003 12:04
ENGLISH using Euro_M.dot –– Printed on 03/11/2003 as IM_M20EN
Overheating power down
If the computer’s internal temperature becomes too high, the computer
will automatically enter Hibernation or Resume mode and shut down.
Problem Procedure
Computer shuts down
DC IN 15V indicator
blinks orange
Leave the computer off until the DC IN 15V and
indicator stops blinking.
If the computer has reached room temperature
and still does not start, or if it starts but shuts
down quickly contact your dealer.
It is recommended to leave the computer off until the its interior reaches
room temperature even though the DC IN 15V indicator stops blinking.
Computer shuts down
and its DC IN 15V
indicator is flashing in
green
Indicates a problem with the heat dispersal
system. Please contact your dealer.
AC power
If you have trouble turning on the computer with the AC adaptor
connected, check the DC IN 15V indicator. Refer to Chapter 6, Power
and PowerUp Modes, for more information.
Problem Procedure
AC adaptor doesn’t
power the computer
(DC IN 15V indicator
does not glow green)
Check the connections. Make sure the cord is
firmly connected to the computer and a power
outlet.
Check the condition of the cord and terminals. If
the cord is frayed or damaged, replace it. If the
terminals are soiled, wipe them with cotton or a
clean cloth.
If the AC adaptor still does not power the
computer, contact your dealer.