Filter
Top Products
Wireless LAN
Portégé M200 H4
Portégé M200 Version
1
Last Saved on 03/11/2003 12:04
ENGLISH using Euro_M.dot –– Printed on 03/11/2003 as IM_M20EN
When installing Wireless LAN Cards, the channel configuration is
managed as follows:
■ For wireless clients that operate in a Wireless LAN Infrastructure, the
Wireless LAN Card will automatically start operation at the channel
identified by the Wireless LAN Access Point, When roaming between
different access points the station can dynamically switch to another
channel if required.
■ For Wireless LAN Cards installed in Wireless clients operating in a
peertopeer mode, the card will use the default channel 10.
■ In a Wireless LAN Access Point, the Wireless LAN card will use the
factoryset default channel (printed in bold), unless the LAN
Administrator selected a different channel when configuring the
Wireless LAN Access Point device.