Filter
Top Products
Getting Started
Portégé M200 36
Portégé M200 Version
1
Last Saved on 03/11/2003 12:04
ENGLISH using Euro_M.dot –– Printed on 03/11/2003 as IM_M20EN
■ Do not drop the computer nor apply excessive impact on the
computer. Do not leave the computer in an automobile where the
computer is exposed to direct sunbeam.
■ Do not put the computer in tablet mode in a bag.
Do not block the vent of the computer when holding it in your forearm to
use in tablet mode. If you maintain to expose your skin to the hot air
released from the vent for a long time, your skin might suffer low
temperature injury.
Connecting the AC adaptor
Attach the AC adaptor when you need to charge the battery or you want
to operate from AC power. It is also the fastest way to get started,
because the Battery Pack will need to be charged before you can operate
from battery power.
The AC adaptor can be connected to any power source supplying from
100 to 240 volts and 50 or 60 hertz. For details on using the AC adaptor
to charge the Battery Pack, refer to Chapter 6, Power and PowerUp
Modes.
Use only the AC adaptor supplied as an accessory. Other AC adaptors
have different voltage and terminal polarities and use of them may
produce heat and smoke or even result in fire or rupture.
Use only the AC adaptor supplied with your computer or an equivalent
adaptor that is compatible. Use of any incompatible adaptor could
damage your computer. TOSHIBA assumes no liability for any damage
caused by use of an incompatible adaptor.
When you connect the AC adaptor to the computer, always follow the
steps in the exact order as described in the User’s Manual. Connecting
the power cable to a live electrical outlet should be the last step otherwise
the adaptor DC output plug could hold an electrical change and cause an
electrical shock or minor bodily injury when touched. As a general safety
precaution, avoid touching any metal parts.