Filter
Top Products
Operating Basics
Portégé M200 43
Portégé M200 Version
1
Last Saved on 03/11/2003 12:04
ENGLISH using Euro_M.dot –– Printed on 03/11/2003 as IM_M20EN
You can use the Tablet PC Pen to execute actions and enter data. Hold
the Tablet PC Pen in a natural position and tap, press or trace on the
screen lightly. Before you begin using the TOSHIBA Portégé M200 for the
first time, you will need to calibrate the Tablet PC Pen. Refer to the
Pointing device section in Chapter 9, Troubleshooting.
Some computers in the series are equipped with a Reserve Pen.
Observe the following precautions on the handling of the Tablet PC Pen.
Do not tap or press the Tablet PC Pen forcefully against the Display
screen. It could damage the Tablet PC Pen and Display screen.
Avoid using or keeping the Tablet PC Pen in the place of rapid
temperature change or in a car where the Tablet PC Pen is exposed to
direct sunbeam. Keep the Tablet PC Pen without pressure constantly
applied to the switch of the Tablet PC Pen. Constant pressure to the
button causes a malfunction or characteristic deterioration.
The Tablet PC Pen is composed of precision parts. Do not drop the Tablet
PC Pen. Strong impact causes a malfunction or characteristic
deterioration.
Do not apply excessive force to the Tablet PC Pen point and the side
switch. Excessive force applied to these parts causes short life or
characteristic deterioration. (Allowable force to pen point, Eraser button,
Pen button: less than 1 kg, for less than 30 seconds)
Avoid water to enter in the Tablet PC Pen or dew condensation. Intrusion
of water or dew condensation causes malfunction.
Do not disassemble the Tablet PC Pen. It causes maladjustment or short
life.
Do not stain the Tablet PC Pen with cosmetics or chemicals. It causes
deterioration of appearance.
Use a glass wiping cloth or dry cloth to clean the Tablet PC Pen when
cleaning. Do not use volatile liquid such as alcohol, thinner or petroleum
benzene.
Do not apply excessive force to the Tablet PC Pen point. Crooked or
deformed pen point due to excessive force causes malfunction.
Keep the small parts of the Tablet PC Pen such as the pen point or the
knob of the side switch away from infant to prevent them to swallow.
Do not use a ball point pen instead of the Tablet PC Pen delivered with
the product. Do not use a broken pen tip
The lead cannot be replaced if it is worn. (Reserve Pen only).
TOSHIBA is not liable to the quality problem of the products due to the
use of the Tablet PC Pen in an environment where above conditions are
not satisfied because of the use by unspecified number of users.