Filter
Top Products
Operating Basics
Portégé M200 419
Portégé M200 Version
1
Last Saved on 03/11/2003 12:04
ENGLISH using Euro_M.dot –– Printed on 03/11/2003 as IM_M20EN
Wireless communication indicator
The wireless communication indicator indicates the status of the wireless
communication functions.
Indicator status Indication
Indicator off Wireless communication switch is set to off.
Automatic power down because of overheating.
Power malfunction.
Indicator glows Wireless communication switch is on.
Wireless LAN or Bluetooth is turned on by an
application.
If you used the Task Bar to disable WLAN, restart the computer or follow
the procedures below to enable the system to recognize WLAN. Open or
click the following: start, Control Panel, System, Hardware Device
Manager, Network adaptors, Atheros AR5001X+ Wireless Network
Adaptor and enable.
NOTE: Indication of Wireless Communication Standards (Wireless LAN
and Bluetooth) The indication of Wireless LAN and Bluetooth is described
on the sticker affixed to the computer. The sticker can be seen by
removing a battery pack from the computer.
LAN
The computer has builtin support for Ethernet LAN (10 megabits per
second, 10BASET) and Fast Ethernet LAN (100 megabits per second,
100BASETx). This section describes how to connect/disconnect to a
LAN.
Do not install or remove an optional memory module while Wakeup on
LAN is enabled.
Wakeup on LAN does not work without the AC adaptor. Leave it
connected, if you are using this feature.