Filter
Top Products
110
Expansion Options
Installing additional memory (optional)
Installing a memory module
The memory modules fit into the memory expansion slot on the
underside of the computer. You need a standard Phillips no. 1
screwdriver to remove the expansion memory slot cover.
If you are adding memory after you have started using the
computer, shut down the operating system, close the display panel
and remove any cables.
CAUTION: Installing a memory module with the computer’s
power on may damage the computer, the memory module or
both.
1 Turn the computer over and locate the expansion memory slot
cover. If you need help, see Underside on page 33.
2 Using a standard Phillips no. 1 screwdriver, remove the two
screws that secure the expansion memory slot cover, then
remove the cover.
Removing the expansion memory slot cover
3 Put the screws in a safe place so that you can retrieve them
later.