Filter
Top Products
4 Replacement Procedures 4.17 LED Board
4.17 LED Board
Removing the LED Board
Remove the LED board according to the following procedures and Figure 4-41.
NOTE: Be carefully peel away the 3 tapes securing the board before you can remove it.
1. Remove the ESD tape for fix LED flat cable.
2. Remove the left and right sides fix touch pad ESD tape.
3. Remove the two M2.5x3 flat round head screws.
4. Disconnect the touch pad flat cables from J1 on the touch pad and remove the LED
board.
5. Disconnect the touch pad flat cables from CN2000 and LED board flat cable from
CN2002 on the LED board.
Figure 4-41 Removing the LED board
4-58 Satellite A60/ Pro A60 Maintenance Manual