Filter
Top Products
User’s Manual 3-17
Hardware, Utilities and Options
Formatting an SD/SDHC memory card
SD/SDHC memory cards are sold already formatted in conformity to
specific standards. If you format the SD/SDHC Card again, be sure to
format it with the TOSHIBA SD Memory Card Format utility, not with the
format command provided within Windows.
In order to run the TOSHIBA SD Memory Card Format utility, click Start ->
All Programs -> TOSHIBA -> Utilities -> SD Memory Card Format.
Please note that the TOSHIBA SD Memory Card Format utility does not
format the protected area of the SD/SDHC memory card - should you need
to format all areas of the memory card, including the protected area, you
will need to obtain an appropriate application that applies the copy
protection system.
Memory Stick/Memory Stick PRO/Memory Stick PRO
Duo/MultiMediaCard
Inserting memory media
The following instructions apply to all types of supported media devices.
1. Turn the memory media so that the contacts (metal areas) are face
down.
2. Insert the media into the Bridge media slot on the side of the computer.
3. Press the media gently to ensure a firm connection is made.
Figure 3-4 Inserting memory media
Set the write-protect switch to the lock position, if you do not want to record
data.
Set the write-protect switch to the lock position, if you do not want to record
data.
Memory media
Bridge media
slot