Filter
Top Products
4 Replacement Procedures 4.6
S
SD/HDD and Fan
4-26 TOSHIBA NB100 Maintenance Manual
Installing the SSD/HDD and Fan
Install the SSD/HDD according to the following procedures and Figures 4-12, 4-13 , 4-14.
CAUTION: To avoid damage, always hold the HDD only by its sides.
1. Attach the SSD/HDD chassis.
2. Secure the SSD/HDD and its chassis with four M3x3.5 black flat-head screws.
CAUTION: To prevent the HDD bracket from being distorted when installing the HDD
pack into the computer, do not press the center of the HDD pack. Always hold the HDD
pack by its sides.
3. Install the SSD/HDD pack into the correct position in the computer. Connect the
SSD/HDD pack to the computer, holding the HDD pack by its sides.
4. Insert the SSD/HDD pack.
5. Secure two M2.5 x 4 flat-head screws on SSD/HDD cover.