Toshiba TDP-B1 Projector User Manual


 
32
Maintenance & Troubleshooting
You might need to turn everything off and power up the
equipment again in the proper order. Refer to your com-
puter’s documentation to determine the correct order.
Make sure your computer’s external video port is turned on.
See the “Portable Computer Activation Chart” on page 38 or
your computer’s manual for details.
Make sure your computer’s video board is installed and con-
figured correctly.
Make sure your computer has a compatible video board. The
projector isn’t CGA, EGA or SXGA compatible.
If you’re using Windows 98:
1
Open “My Computer” icon, the Control Panel folder and
then the Display icon.
2
Click the Settings tab.
3
Verify that the Desktop area is set to 1024x768 or less.
Problem: Image is too wide or narrow for screen
Adjust the zoom or projector placement.
Adjust the resolution of your video card if it’s greater than
1024x768.