Filter
Top Products
47
Operations
46
<Subnet mask>: For dividing the network, the subnet mask determines the range
of an IP address assigned to a terminal. (Example: 255.255.xxx.xxx)
<Gateway>: Gateway specifies a network device like a router when accessing a
server outside the network. It is identified by an IP address. (Example:
111.112.xxx.xxx)
[Email]
<Status notification>: Sends alarm information to the specified E-mail address
when an error such as lamp blowout occurs.
<SMTP server>: Set an IP address of the SMTP server.
<Port number>: Enter a port number of the SMTP server.
<Destination address>: Enter within 60 characters. (Example: xxx@xxx.xxx)
[PJLink]
<PJLink authentication>: Set whether or not to authenticate the user by password
when the projector is accessed via the PJLink-compliant Software Application. (Set
[On] or [Off].)
<Password>: Enter a password for confirmation when the above <PJLink
authentication> is set to [On].
Precautions
• When purchased, <PJLink authentication> is set to [Off] and <Password> is not
set by factory setting. You are recommended to make authentication setting as soon
as possible.
• If you forget a password, set it again.
Character entry
Enter characters using numeric keys of the remote control.
The character is entered with a beep sound if the beep sound is set to [On].
Character entry mode
Remote
control
button
Items using characters, numbers, and symbols
(e.g., projector name and destination address)
Number only
“1” “.” “@” “-” “_”
“2” “A” “B” “C” “a” “b” “c”
“3” “D” “E” “F” “d” “e” “f”
“4” “G” “H” “I” “g” “h” “i”
“5” “J” “K” “L” “j” “k” “l”
“6” “M” “N” “O” “m” “n” “o”
“7” “P” “Q” “R” “S” “p” “q” “r” “s”
“8” “T” “U” “V” “t” “u” “v”
“9” “W” “X” “Y” “Z” “w” “x” “y” “z”
“0” “space!"#$%&'()*+,-./:;<=>?@[ ]^_`{ }~”
Deletes one character.
“1”
“2”
“3”
“4”
“5”
“6”
“7”
“8”
“9”
“0”
Deletes one character.
Using the menus (Continued)
■ The control setting menu
This menu sets items regarding wired LAN.
By this setting, you can transmit operation status messages from the projector to the
specified E-mail address.
[ : Wired LAN setting] [ : Select item]
Projector name: Enter a character string (0 to 64 characters)
using numeric keys of the remote control.
DHCP: Use Not use
IP address: Enter a character string using numeric keys of the
remote control.
Subnet mask: Enter a character string using numeric keys of the
remote control.
Gateway: Enter a character string using numeric keys of the
remote control.
Confirm: [OK Cancel]
[ : E-mail setting] [ : Select item]
Status notification: On Off
SMTP server: Enter a character string using numeric keys of the
remote control.
Port number: Enter a character string using numeric keys of the
remote control.
Destination address: Enter a character string using numeric
keys of the remote control.
Confirm: [OK Cancel]
[ : PJLink setting] [ : Select item]
PJLink authentication: On Off
Password: Enter a character string (1 to 32 characters) using
numeric keys of the remote control.
Confirm: [OK Cancel]
Description
Item
Wired LAN
Email
PJLink
Detailed description
[Wired LAN]
<Projector name>: Setting a projector name helps you identify each of the
projectors that are connected to the network.
•You cannot set a projector name starting with ERR.
<DHCP>: When <DHCP> is set to [Use], an IP address is automatically assigned
to the projector by a DHCP server. In case of a network that an IP address cannot
be assigned automatically, set <DHCP> to [Not use].
When <DHCP> is set to [Not use], ask your network administrator for IP address,
subnet mask, and gateway, then set the following items manually:
<IP address>: This is a unique number assigned for a terminal to connect to a
network. The format is a quartet of 3-digit decimal number. (Example:
111.112.xxx.xxx)