TP-Link Archer T2UH Network Card User Manual


 
Quick
Installation Guide
AC600 High Gain Wireless Dual Band USB Adapter
MODEL NO. Archer T2UH
7106505283 REV2.0.1
For more information, please visit our website: http://www.tp-link.com
Connect to a Computer
1
You can also download the driver and utility at www.tp-link.com
A: Insert the CD and click Run Autorun.exe from the pop-up
Autoplay window.
Note: In some operating systems, the CD screen will pop up automatically.
Otherwise, run the CD manually.
B: Select Archer T2UH and click Install Driver and Utility, then follow the
InstallShield Wizard to complete the installation.
Setup Wizard
Archer T2UH
Install Driver and Utility
User Guide
Browse CD
EXIT
Archer T2U
Install Driver and Utility
2
Option 1: Directly Option 2: Via the USB Extension Cable
Join a Wireless Network
3
Option 3: Via Windows Wireless Utility
Option 1: Via TP-LINK Utility Option 2: Via Wi-Fi Protected Setup (WPS)
Select your preferred Wi-Fi network from the pop-up utility window and
click Connect. The symbol indicates a successful connection.
A: Press the WPS button on your router.
B: Within 2 minutes, press and hold the WPS button on the adapter until the
following screen appears.
C: When you are prompted “Successfully connected to the network by
WPS!”, click OK.
WPS Profile AdvancedStatus Network
Network Name(SSID)
Channel
Signal
Security
2 (2.4G)
5 (2.4G)
149 (5G)
None
WPA/WPA2-Personal
None
34567_TEST
abcdef_0903
AAAAAA
6 (2.4G)TP-LINK_A
Connect automatically
WPA/WPA2-Personal
Connect
SoftAP
34567_TEST
Network Na
TP-LINK_A
Configuring the wireless network.
Connecting to the network…
Note:
1. In Windows XP, a Found New Hardware Wizard window will appear when the adapter is detected. Please click Cancel.
2. In Windows 8.1, the adapter is able to search for Wi-Fi networks after being inserted, but it will not function properly until you install the driver and utility below.
Note: In Windows XP, you need to close the TP-LINK Utility before using the Windows Wireless Utility.
Click (Network icon) on the system tray and select your Wi-Fi network. Click Connect.
©2015 TP-LINK