TP-Link AV600 Network Card User Manual


  Open as PDF
of 2
 
Quick Installation Guide
AV600 Gigabit Powerline Adapter
Package Contents
Resource CD
Ethernet Cable
TL-PA6010
QIG
AV600 Gigabit Powerline Adapter
Warning on Final Location
Powerline Adapter
7106504321 REV1.0.0
*
MODEL NO.
TL-PA6010
NOTE:
1.
2.
Network Installation
2
LED and Button Descriptions
1
NOTE:
It's strongly recommended that you plug the adapter directly into the
wall socket, for some power strips have surge protector which can lter data.
To add another adapter
Plug an additional adapter into the wall socket, and the connection will be
established automatically within 60 seconds.
To surf the Internet, please make sure that your network is properly
connected to the Internet.
If the adapters fail to automatically link to each other, you can
establish a private network by using the pair button. To set up a
private network, please go to Appendix: Using the Pair Button for
detailed instructions.
Pair Button
Power LED
Powerline LED
Ethernet LED
TP-LINK powerline adapters are Plug and Play. After taking the steps above,
you can surf the Internet.
Extension Socket
* The provided power plug may dier from the picture due to dierent regional
power specications. Here we take the EU version as an example.
Item Status Description
Power LED
Powerline LED
Ethernet LED
Solid
Solid
Solid
Blinking
Blinking
Blinking
O
O
O
The adapter is on.
The adapter is o.
The adapter is in power-saving mode or in pairing
procedure.
The adapter is connected to a powerline network.
The adapter is transferring data.
The adapter isn’t connected to any powerline network
or is in power-saving mode. *
The Ethernet port is connected, but there is no data
being transferred.
The Ethernet port is transferring data.
The Ethernet port isn’t connected.
*
Five minutes after the device connected to the adapter is turned o, the adapter will
automatically switch to power-saving mode.
Item
Pair Button
Description
Pair button is used to secure a powerline network. To secure
your network, please refer to Appendix: Using the Pair Button.