Filter
Top Products
User’s Guide
CSEFE10xx-10x
Slide-in-Module Media Converter
• Switchable Ethernet and Fast Ethernet
• 10 Mb/s Copper to Fiber
• 100 Mb/s Copper to Fiber
Transition Networks CSEFE10xx-10x series Ethernet /
Fast Ethernet media converter is designed to be
installed in a Transition Networks PointSystem™
chassis and is a 10Mbps or 100Mbps switch-selectable
media converter.
Both the copper and fiber links operate at the same speed setting via a hard set with
a dip switch, so the media converter operates at either 10 Mb/s copper to fiber or
100 Mb/s copper to fiber.
* Typical maximum cable distance.
Actual distance is dependent upon the
physical characteristics of the network.
(TX) = transmit, (RX) = receive
The CSEFE10xx-10x media converter is designed to be installed in pairs, where
one is the local media converter and the other is the remote. For example, a local
CSEFE1011-100 converter is connected, via fiber, to a remote CSEFE1011-100
converter.
For a single fiber network, a local CSEFE1029-100 is connected, via fiber, to a
remote CSEFE1029-101 converter.
Installation . . . . . . . . . . . . . . . . . .2
Operation . . . . . . . . . . . . . . . . . . .5
Cable Specifications . . . . . . . . . . .6
Technical Specifications . . . . . . . .8
Troubleshooting . . . . . . . . . . . . . .9
Compliance Information . . . . . . .12
Part Number Port One - Twisted-Pair
Copper
Port Two - Fiber Optic
CSEFE1012-100 RJ-45, 100 m (328 ft)* ST, 1310 nm single mode
duplex fiber, 20 km (12.4 miles)*
CSEFE1014-100 RJ-45, 100 m (328 ft)* SC, 1310 nm single mode
duplex fiber, 20 km (12.4 miles)*
CSEFE1015-100 RJ-45, 100 m (328 ft)* SC, 1310 nm single mode
duplex fiber, 40 km (24.8 miles)*
CSEFE1022-100 RJ-45, 100 m (328 ft)* ST, 1310 nm single mode
duplex fiber, 40 km (24.8 miles)*
CSEFE1029-100 RJ-45, 100 m (328 ft)* SC, 1310 mn (TX)/1550 nm (RX)
single fiber, 20 km (12.4 miles)*
CSEFE1029-101 RJ-45, 100 m (328 ft)* SC, 1550 mn (TX)/1310 nm (RX)
single fiber, 20 km (12.4 miles)*