Transition Networks SPOEB10XX-100 Switch User Manual


 
SPOEB10xx-100
User’s Guide
• Stand-Alone Media Converter
• Power Over Ethernet
• 10/100Base-TX to 100Base-FX
The SPOEB10xx-1xx Power over Ethernet (POE)
is a two port 10/100Base-TX to 100Base-FX media converter capable of providing
power to Data Terminal Equipment (DTE) Power Devices (PD) via the Media
Dependent Interface (MDI) twisted pair cable. The SPOEB10xx-100 emulates Power
Sourcing Equipment (PSE) and provides power via the 10/100Base-TX interface for a
remote PD device that complies with the IEEE802.3af™ standard.
Installation . . . . . . . . . . . . . .3
Operation . . . . . . . . . . . . . . .9
Cable Specifications . . . . . .10
Technical Specifications . . .12
Troubleshooting . . . . . . . . .13
Contact Us . . . . . . . . . . . . .15
Compliance Information . . .16
Part Number Port Two - Duplex Fiber-Optic
100Base-FX
SPOEB1011-100 RJ-45
100 m (328 ft.)*
ST, 1300 nm multimode
2 km (1.2 miles)
SPOEB1013-100 RJ-45
100 m (328 ft.)*
SC, 1300 nm multimode
2 km (1.2 miles)
SPOEB1014-100 RJ-45
100 m (328 ft.)*
SC, 1310 nm single mode
20 km (12.4 miles)
SPOEB1015-100 RJ-45
100 m (328 ft.)*
SC, 1310nm single mode
40 km (24.9 miles)
SPOEB1016-100 RJ-45
100 m (328 ft.)*
SC, 1310 nm single mode
60 km (37.3 miles)
SPOEB1017-100 RJ-45
100 m (328 ft.)*
SC, 1550 nm single mode
80 km (49.7 miles)
*Cable distances are the typical maximum distances. Actual distance is
dependent upon the physical characteristics of the network installation.
Port One - Copper
10/100Base-TX
SPOEB1035-100 RJ-45
100 m (328 ft.)*
SC, 1310 nm single mode
120 km (74.6 miles)