Tyco S610s Network Card User Manual


 
www.cemsys.com
OVERVIEW
The S610s Card Reader is designed for use as part of an integrated on-line access
control system and is used to control access to restricted areas or in special
applications where card activation of machinery is required.
Using a powerful 32bit processor, the S610s gives full off-line validation and decision
making at the point of entry, even when host communication is not available.
Designed for use with all card technologies the S610s device is available with integral
reading support for 125 KHz HID Proximity, 13.56 MHz MiFare and PicoPass smartcard
as well as a multi-technology option to support Proximity + MiFare. Two additional
wiegand inputs are also available for connecting other reading technologies externally
or an Exit read head for IN/OUT control.
The IP 65 rated polycarbonate enclosure houses the reader electronics, a large 4x3
Keypad, graphical display screen and three LED indicators.
The reader has 4 analogue inputs, which can be used to monitor door and alarm
conditions for transmission to the host computer. Two outputs are also available to
control the activation of locks or other equipment.
S610s Reader
•Industry’smostadvancedcard
reader
•Integralreadingtechnologyfor
Proximity, MiFare, Proximity +
MiFare or Inside PicoPass.
•Structureddatabaseallowsstorage
of large amounts of cardholder
records for off-line card validation
•BacklitMonochromeGraphics
LCD display with heating element
provides localised character sets
and instantly recognisable icons
under the most extreme conditions
•UniversalReader-supportsallcard
technologies
•Keypadforcongurationand
optionalpersonnelIdentication
Number (PIN)
•4analogueinputstomonitoralarm
conditions and 2 changeover relay
outputs to activate door strike or
other equipment
•Remoteprogrammingfacilityto
download program
•BroadcastFacilitytoenable
selective operational mode
FEATURES
S610s Reader
Multi-technology Intelligent Serial Reader