Filter
Top Products
24 and 16 Port Smart Switch II – User Manual Page 20
Switch Name – This item can be used to name the switch. This
name is then shown at the top of each menu. To action this menu
item use the U/D key to highlight the switch name field and press the
Space bar to action the field. A name (maximum 8 characters) can
now be typed. Once the name is typed press the Enter key and the
name will be changed.
Broadcast Storm Filtering – To Enable Broadcast Storm Filtering
highlight item 3 and press the Space bar. With Broadcast Storm
Filtering enabled multicast/broadcast traffic received at a port will be
blocked when a threshold it met. This prevents the switch and
network being overloaded by broadcast traffic, which could cause
loss of connectivity.
Load Factory Defaults – With this menu item selected the switch is
set to a configuration the same as originally shipped from the
manufacturer. Use the U/D keys until cursor is adjacent to the Load
Factory Defaults field and press the Space bar and the following
menu will be displayed: -
Figure 14 - Loading Factory Defaults
Product Number 0-1591093-x 0-1591047-x Issue 1
© Tyco Electronics 2005