Ultra electronic 300 Printer User Manual


 
Ultra Electronics Card Systems Quick Start Guide
MAGICARD Color Printer Page 21
After about 30 seconds, the Printers window appears and the PrintMagic MAGICARD
Printer on LPT1 should have been added to the Installed Printers list.
Press the Set as Default Printer button.
DO NOT check the Use Print Manager check box.
Select the Close button.
Close the Control Panel window.
NOTE: The above procedure assumes that the floppy disk drive on your PC is Drive A and
also that the printers parallel port on the PC is LPT1. Change the settings if appropriate.