Unitech MSR120 Series Network Card User Manual


  Open as PDF
of 5
 
MSR120 Simple Manual 2003/1/21
MSR 120 SERIES
Magnetic Stripe Card Reader
Universal Serial Bus (USB) Interface
Thank you for purchasing the MSR120 series products. The MSR120 Series USB Interface Magnetic Card Reader is ideal for retail
systems, time keeping systems, security systems and the card reader related systems. The MSR120 series are designed to offer the user
a card reader solution that will complement many applications. Triple track MSR120 reader is uniquely designed to read both credit
cards and Driver Licenses (AAMVA and California standard).
FEATURES
1
Light weight: 120g
2
Compact size: 100L*34W*28H (mm)
3
LED and Buzzer indicators indicate card status
4
Low power consumption
5
Single, dual, or triple track versions allow for reading all types of magnetic cards, including credit cards and drivers licenses.
CONFIGURATION
MSR120-33 Triple track 1&2&3
AGENCY APPROVED
- Comply with the limits for a Class A digital device, pursuant to part 15 of the FCC rules.
- Comply with CE mark Class A, UL, and cUL
WARRANTY
This product is served under one-year warranty of defects in material and functionality to the original purchasers. Within the warranty
period, if the product found to be defective will be repaired or replaced. This warranty applies to the products only under the normal use
of the original purchasers, and in no circumstances covers incidental or consequential damages through consumers’ misuse or
modification of the product.
WARNING
You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your
authority to operate the equipment.
SET-UP
1) Turn the system power off.
2) Connect PC and MSR120 USB connector of signal cable to a free USB port
3) Turn the system power on.
4) Install USB driver (ref. to Appendix A)
SPECIFICATIONS
Recording Method: Two-frequency coherent phase (F2F), compatible with ISO 7811 and AAMVA.
Swipe Speed: 5 to 50 in/sec (worst case with +/- 12% jitter card)
Power Requirements: 5VDC/120mA
Excerpt from MSR120 Programmer’s Manual (PM010, Rev.1.1) Page 1 / 5
--- Proprietary and Confidential ---
next