ViewSonic PJL6243 Projector User Manual


 
24ViewSonic PJL6243
24
Basic Operation
Sound Adjustment
1
2
Press the MENU button to display the On-Screen
Menu. Use the Point ▲▼ buttons to select Sound.
Press the Point or the SELECT button to access
the submenu items.
Press the VOLUME+/– buttons on the top control or on
the remote control to adjust the volume. The volume
dialog box appears on the screen for a few seconds.
Press the MUTE button on the remote control to select
On to temporarily turn off the sound. To turn the sound
back on, press the MUTE button again to select Off or
press the VOLUME +/– buttons. The Mute function is
also effective for the AUDIO OUT jack.
Press the SELECT button to switch the mute function On/
Off. When the sound is turned off, On is displayed. Press
the VOLUME +/– buttons again or adjust MIC gain’s
volume to turn the sound back on.
Use the Point ▲▼ buttons to select the desired
submenu item and press the SELECT button to
access the selected item.
Volume
Volume
Mute
Press the Point button to turn up the volume; Press
the Point button to turn down the volume.
Mute
Menu Operation
Sound Menu
Volume Dialog Box
Remote Control
VOLUME+button
VOLUME - button
MUTEbutton
TopControl
Approximate level of
the volume.
Press the MUTE button to set the Mute
function On or Off. The dialog box
disappears after 4 seconds.
Direct Operation
VOLUME+/-buttons
Use the Point ▲▼ buttons to switch the MIC function
On/Off,and then press the SELECT button. When On is
selected, the synthesis volume (MIC and RCA) is output.
MIC
MIC gain
Press the Point ► button to turn up the MIC mixing gain;
Press the Point ◄ button to turn down the MIC mixing
gain.
MIC Setup
AUDIO IN
MIC Off
MIC On
RCA L/R terminal
Mini jack
Video audio input
PC audio input
Video or PC audio input
MIC input
AUDIOINPUTSELECTION(seepages14-15)
Note:
• When Off is selected in MIC function, the
MIC gain and Standby MIC out functions are
not available.
• Only the Standby mode is set to Network,
Standby MIC out can be selected.
• If the MIC function is turned on when
connecting PC audio to the AUDIO IN (a mini
jack), loud sound may be output suddenly
depending on the setting value of MIC gain.
Standby MIC out
When setting the Standby MIC out function to On and
in Standby mode status, only MIC input volume can be
output.