Filter
Top Products
ViewSonic PJ350 7
Adjusting the Projection Angle
Adjust the projection angle using the Height Adjustment button. See also KEYSTONE under the
Image-I Menu, page 12.
To adjust the projection angle, do the following:
1
Press the Height Adjustment button with one hand, while tilting the projector with the other hand.
The Foot Adjuster will extend accordingly. See Figure 4 below.
2
When the desired projection angle is reached, release the Height Adjustment button. This locks
the Foot Adjuster into place.
Adjusting the Focus
To adjust the focus, rotate the Focus Ring on the lens as shown below. The projector can focus within
the range of 3.3 feet to 39.4 feet (1m to 12m).
Warning Indicators
• When the Lamp LED is solid orange, change the lamp unit. See page 20 for instructions.
• When the Temp (Temperature) LED is solid orange, the projector has overheated. It will
automatically shut down. Under normal conditions, the projector can be switched on again. If the
problem persists, contact your local dealer for service or contact ViewSonic Customer Support.
See page 21.
Figure 4: Projection Angle Adjustment
Height Adjustment
button
Foot adjuster