Filter
Top Products
15
ViewSonic PJ500
Options Menu
The following adjustments and settings are available when OPT. is selected on the menu. Select an
item with the and buttons and start operation.
Table 7: Options Menu
Item Description
VOLUME
Volume Adjustment: Use the buttons.
MENU COLOR
Select Menu Background Color: Select with the buttons.
LANGUAGE
Operation Start/Stop: Press the buttons.
Select Menu Display Language: Select with the and buttons.
AUTO OFF
Operation Start/Stop: Press the buttons.
Set AUTO OFF: Set 1 ~ 99 minutes with the and buttons. The system
automatically enters the standby mode when a signal is not received for the set time.
Clear AUTO OFF: Select STOP (0 min.) with the button. When STOP is selected the
system does not enter the standby mode even if no signal is received.
SYNC ON G
Operation Start/Stop: Press the buttons.
SYNC ON G Valid: Select TURN ON with the button.
SYNC ON G Invalid: Select TURN OFF with the button.
NOTE: May not be displayed correctly with some input signals when SYNC ON G is valid.
In such cases, remove the signal connector so that no signal is received, set SYNC ON G
to invalid, and reconnect the signal.
WHISPER
Operation Start/Stop: Press the buttons.
Set/Clear Whisper Mode: Press the and buttons. When the WHISPER mode is
selected, the WHISPER mode is active. In this mode, acoustic noise level from the unit is
reduced, brightness level on screen is lowered and the lamp life is lengthened.