Filter
Top Products
Using the ViewPanel
Setting the Timing Mode
Setting the timing mode is important for maximizing the quality of the screen
image and minimizing eye strain. The
timing mode
consists of the
resolution
(example 1600 x 1200) and
refresh rate
(or vertical frequency--example 60
Hz). After setting the timing mode, use the OnView
®
controls (pages 8 - 10) to
adjust the screen image.
The recommended timing mode for this ViewPanel is:
VESA
®
1600 x 1200 @ 60
Hz
To set theTiming Mode:
1 Set the resolution: Right-click on the Windows
®
desktop >
Properties
>
Settings
> Desktop Area or Screen Area for Windows 98 and newer > set
the resolution.
2 Set the refresh rate: See your graphic card's user guide for instructions.
WARNING: Do not set the graphics card in your computer to exceed the
maximum refresh rate of 75Hz; doing so may result in permanent damage to
your ViewPanel.
OSD Lock Settings
•
OSD Lock:
Press and hold [1] and the up arrow ▲ for 10 seconds. A message
appears onscreen saying that the OSD is locked. If any buttons are pressed
the message OSD Locked displays for a few seconds.
•
OSD Unlock:
Press and hold [1] and the up arrow
▲ again for 10 seconds. A
message appears onscreen saying that the OSD is locked.
ViewSonic VP230mb 6