Filter
Top Products
Do the following to adjust the screen image:
1 To display the Main Menu, press button [1]. From the Main Menu you can
also navigate to the other menus shown below:
NOTE: All OnView menus and adjustment screens disappear automatically
after about 10 seconds (default). This time can be changed on the OSD Time
Out menu.
2 To highlight a control you want to adjust, press ▲ or ▼ to scroll up or down
the Main Menu.
3 To select the highlighted control, press button [2].
4 To adjust the selected control, press the up ▲ or down ▼ buttons.
5 To save the adjustments and exit the menu, press button [1] twice.
The following tips may help you optimize your display:
• Adjust your computer's graphic card so that it outputs a video signal 1600 x
1200 @ 60Hz to the VP230mb. (Look for instructions on "changing the
refresh rate" in your graphic card's user guide.)
• If necessary, make small adjustments using H POSITION and V POSITION
until the screen image is completely visible
. (The black border around the
edge of the screen should barely touch the illuminated "active area" of the
ViewPanel
®
.)
• Adjust Fine Tune so that the screen image looks focused, crisp, and sharp.
Contrast/Brightness
Manual Image Adjust
Color Adjust
Setup Menu
Memory Recall
Advanced Menu
Auto Image Adjust
ViewSonic VP230mb 8