WHP Wireless DL360 Server User Manual


 
216 HP ProLiant DL360 Generation 4 Server Reference and Troubleshooting Guide
System AC Power Overload (Power Supply X).........................................................................220
System AC Power Problem (Power Supply X) ..........................................................................220
1615-Power Supply Failure, Power Supply Unplugged, or Power
Supply Fan Failure in Bay X
Audible Beeps: None
Possible Cause: The power supply has failed, or it is installed but not connected
to the system board or AC power source.
Action: Reseat the power supply firmly and check the power cable or replace
power supply.
1616-Power Supply Configuration Failure
-A working power supply must be installed in Bay 1 for proper cooling.
-System Halted!
Audible Beeps: None
Possible Cause: Power supply is improperly configured.
Action: Run the server setup utility and correct the configuration.
Event List Error Messages
List of Messages:
Introduction to Event List Error Messages.................................................................................217
A CPU Power Module (System Board, Socket X).....................................................................218
ASR Lockup Detected: Cause ....................................................................................................218
Automatic Operating System Shutdown Initiated Due to Fan Failure .......................................218
Automatic Operating System Shutdown Initiated Due to Overheat Condition..........................218
Blue Screen Trap: Cause [NT]... ................................................................................................218
Corrected Memory Error Threshold Passed (Slot X, Memory Module Y)... .............................219
EISA Expansion Bus Master Timeout (Slot X)..........................................................................219
PCI Bus Error (Slot X, Bus Y, Device Z, Function X) ..............................................................219
Processor Correctable Error Threshold Passed (Slot X, Socket Y)............................................219
Processor Uncorrectable Internal Error (Slot X, Socket Y)........................................................220
Real-Time Clock Battery Failing ...............................................................................................220