Filter
Top Products
2 Product Overview
32 Xerox 6204 Wide Format Solution
Product Overview
2
Checking the Circuit Breaker
The circuit breaker opens automatically and
removes input power from the machine if a short
circuit or overcurrent condition occurs.
When the circuit breaker switch is in the up
[
| ] position, input power is supplied to the
machine. If the machine will not be used for an
extended period, the printer and the controller
may be powered down as described in "System
Power Off Procedure" (P.30).
Check the Circuit Breaker once a month for
correct operation. If you notice any unusual
conditions, contact your Xerox Customer
Support Center.
The procedure for checking the Circuit Breaker is as follows:
1 Perform steps 1 through 3 of the "System Power Off Procedure" (P.30).
2 Press the TEST button while the circuit breaker
switch is in the on [
| ] position. If the circuit
breaker turns off, it is operating correctly.
3 Reset the circuit breaker switch and perform the
"System Power On Procedure" (P.29).
On
Test
Button