Filter
Top Products
Fault Codes
Xerox CopyCentre/WorkCentre 118 Quick Reference Guide 105
016-730 An unsupported command was detected. To print again, check the print
data and delete the command that caused the error.
016-732 The form specified in the emulation setting is not registered in the host
computer. Resend the form data.
016-744 The machine could not print the PDF file because it contains features
not supported in the machine. Open the file in Adobe Reader and select
[Print] from the [File] menu to print it.
016-749 A PJL command syntax error occurred. Check the print settings, or
correct the PJL command.
016-751 The machine could not print the PDF file using ContentsBridge Utility.
Open the file in Adobe Reader and select [Print] from the [File] menu to
print it.
016-752 The machine could not print the PDF file using the ContentsBridge utility
because of insufficient memory. Change the print mode in
ContentsBridge as follows and try again.
• If the high quality mode is selected, change it to the standard mode.
• If the standard mode is selected, change it to the high speed mode.
016-753 A password entered for the direct print is incorrect. Enter a password
correctly.
016-754 The machine could not print the PDF file because it contains objects that
are compressed using the LZW algorithm.
Print the file using the following methods.
• Open the file in Adobe Reader and select [Print] from the [File] menu.
• Use the PostScript feature.
016-755 The machine could not print the PDF file because it does not allow
printing. Open the file in Adobe Acrobat (not Adobe Reader) and
deselect the [No Printing] check box in the document security settings,
and print again.
016-757 The password entered is incorrect. Enter the correct password.
016-758 The account is not authorized for copying. Contact the Key Operator.
016-759 The maximum number of copies has been reached. Contact the Key
Operator.
016-760 An error occurred during PostScript processing. Take one of the
following actions.
• Set for optimized speed in the print driver.
• Increase the size of the print page buffer.
• Increase PostScript memory.
016-761 An error occurred during image processing. Set for optimized speed in
the print driver and try again. If this does not fix the problem, set for
highest compatibility to ensure printing and try again.
Code Description and Corrective Action