Filter
Top Products
DGX-620/520, YPG-625/525 Owner’s Manual 91
Using USB Flash Memory
1
Connect a USB flash memory to the
USB TO DEVICE terminal, being careful
to insert it with the proper orientation.
2
Check that the file control icon is shown
in the MAIN display.
You can go to the FILE CONTROL display
from which you can access USB flash memory
operations by pressing the [MENU] button
from this display.
Connecting a USB Flash Memory
• In order to play songs copied to a USB flash memory from a com-
puter or other device, the songs must be stored either in the USB
flash memory’s root directory or a first-level/second-level folder in
the root directory. Songs stored in these location can be selected
and played as song numbers 036–535 (page 32).
Songs stored in third-level-folders created inside a second-level
folder cannot be selected and played by this instrument.
USB flash memory (Root)
Song
File
Song
File
Song
File
Can be selected/played.
Cannot be selected/played.
Song
File
IMPORTANT
Menu Reference Page
Format 92
Save 93
SMF Save 94
Load 95
Delete 96
A message (information or confirmation
dialog) sometimes appears on the display to
facilitate operation. Refer to the “Messages”
on page 114 for an explanation of each
message.
File Control
Icon
• No sound will be produced if you play the keyboard while the FILE
CONTROL display is showing. Also, in this state only buttons related
to file functions will be active.
NOTE
• The FILE CONTROL display will not appear in any of the following
cases:
• During style or song playback.
• During a lesson.
• While data is being loaded from a USB flash memory.
NOTE