Filter
Top Products
R Remote Operation Manual 11
④ [SYSTEM] indicator/[SYNC] indicator
Indicates the status of the R series unit or the Dante status. For more about this indication, refer
to "Messages" in the owner’s manual of R series.
⑤ Connector index
Indicates the range of connector numbers corresponding to the HA settings shown at right. Click
this to access the
"I/O Device Edit" dialog box .
HA display area
Here you can view and edit HA settings for the R series unit.
⑥ [+48V] button
Turns phantom power on/off for each channel.
⑦ GAIN knob
Specifies the analog gain for the HA of the R series unit. The current setting is shown in the
numeric box located below the knob. The level meter located at the immediate right of the knob
indicates the input level of the corresponding port.
⑧ [HPF] button
This is an on/off switch for the high-pass filter that is built into the HA of the R series unit. To
specify the cutoff frequency, make settings in the
"I/O Device Edit" dialog box.