Filter
Top Products
1-3
CHAPTER 1 Using the Robot Safely
(3) Follow the instructions on warning labels and in this manual.
Warning label 3 (Fig. 1-3) is affixed to the robot. Refer to Fig. 2-2 to
Fig. 2-4 in Chapter 2 for the position.
• Be sure to read the warning label and this manual carefully and make your
thoroughly understand the contents before attempting installation and op-
eration of the robot.
• Before starting the robot operation, even after you have read through this
manual, read again the corresponding procedures and cautions in this manual
as well as descriptions in the this chapter (Chapter 1, "Using the Robot
Safely").
•Never install, adjust, inspect or service the robot in any manner that does
not comply with the instructions in this manual.
WARNING
Improper installation or operation can result in serious injury or death.
Read owner's manual and all warning labels before operation.
Improper Installation or operation
can result in serious injury or
death.
Read owner's manual and all
warning labels before operation.
WARNING
■Fig. 1-3 Warning label 3
(4) Do not use the robot in environments containing inflammable
gas, etc.
WARNING
• This robot was not designed for operation in environments where inflamma-
ble or explosive substances are present.
•Do not use the robot in environments containing inflammable gas, dust or
liquids. Explosions or fire could otherwise result.
(5) Do not use the robot in locations possibly subject to electro-
magnetic interference, etc.
WARNING
Avoid using the robot in locations subject to electromagnetic interference, elec-
trostatic discharge or radio frequency interference. Malfunction may otherwise
occur.