Zebra Technologies 105Se Printer User Manual


 
Introduction
Scope
This user’s guide contains descriptive information and operational in-
structions for the Zebra 105Se and 160S thermal transfer demand printers.
It contains information on how to set up and operate the printer as well
as adjustment and maintenance procedures that can be performed by the
operator. Information covering the use and operation of Zebra S-Series
Printer options is also included.
Additional documentation for the Zebra S-Series Printer is available:
The ZPL II Programming Guide (part # 46469L).
The two-volume Maintenance Manual: Volume 1: General Mainte-
nance (part # 38452L) contains the information you will need to
maintain your printer. Volume 2: Circuit Descriptions and Electrical
Schematics (part # 38453L) contains the information you will need to
repair the circuit boards at the component level. You may order both
volumes as a set by ordering part # 31452L.
Model Designation
Labels located inside the media compartment above the frame support
at the rear of the S-Series Printer include both the serial number and
model designation. If you need to contact our technical support
staff for assistance, please have both the model designation and serial
number available so that we may help you more efficiently.
System Overview
The S-Series Printer, when connected to an appropriate ASCII data
source, functions as a complete label, ticket, and tag printing system.
Customer-supplied asynchronous modems may be used to connect re-
mote hosts to the S-Series Printer.
Connection of the S-Series Printer to data sources using data codes
other than ASCII requires the use of an appropriate protocol converter.
Connection to data sources using interfaces other than the type installed
in the printer requires the use of an appropriate interface converter.
Zebra S-Series User’s Guide 1-1
9