Filter
Top Products
54 Zebra ZXP Series 7 Card Printer User’s Manual P1036101-002
3: Operation
Operator Control Panel (OCP)
Operational
MESSAGE DESCRIPTION
ALARM An error message needs to be cleared before normal operations
can resume.
CANCELING The Cancel button was pressed, and the current operation is
being terminated.
CONFIGURATION DATA Configuration data is being transferred from the computer to
the printer.
CONTACT OPERATION Contact Smart Card is being encoded; i.e., the card is in position
and data is being transferred.
CONTACTLESS OPERATION Contactless Smart Card is being encoded; i.e., the card is in
position and data is being transferred.
COOLING
PRINTHEAD TEMPERATURE
Cooling printhead to temperature.
COOLING
WAITING TO LAMINATE
Ready to accept a print job, laminator cooling.
DIAGNOSTIC Diagnostic testing in progress.
JOB DATA Data is being transferred from the computer to the printer.
LAMINATING Print job received, laminating in process.
MAG OPERATION A Magnetic Stripe Card is being encoded; i.e., card is in position
and data is being transferred.
MANUALLY INSERT CARD Waiting for manual card feed (this function is set via the Card
Setup Tab; see Page 51 or Page 76.
OFFLINE Status toggled (offline/online) via the OCP Advanced
Settings Menu.
PAUSING The Pause button was pressed.
PRINTING Print job received, printing in process.
READY Ready and at temperature.
STANDBY Printer is in “sleep” mode; i.e., power save mode.
WAIT
INITIALIZING
Performing a self test on startup.
WARMING
WAITING TO LAMINATE
Ready to accept a print job, laminator warming; e.g., when
switching from 1-sided laminating to 2-sided laminating, or when
the printer has just powered up and the laminator is warming.
WARMING
PRINTHEAD TEMPERATURE
Warming printhead to temperature.
WARNING Indicates that additional OCP instructions need to be performed;
e.g., RIBBON LOW, etc.