Filter
Top Products
ES-2024 Series User’s Guide
Chapter 16 Port Authentication 114
Click Advanced Application, Port Authentication in the navigation panel to display the
screen as shown.
Figure 50 Port Authentication
16.3 Activating IEEE 802.1x Security
To enable port authentication, first activate IEEE802.1x security (both on the switch and the
port(s)) then configure the RADIUS server settings.
From the Port Authentication screen, display the configuration screen as shown.
Figure 51 Port Authentication: 802.1x
The following table describes the labels in this screen.
Table 34 Port Authentication: 802.1x
LABEL DESCRIPTION
Active Select this check box to permit 802.1x authentication on the switch.
Note: You must first enable 802.1x authentication on the switch
before configuring it on each port.
Port This field displays a port number.