Filter
Top Products
ES-2024 Series User’s Guide
53 Chapter 4 The Web Configurator
4.3.2 Change Your Password
After you log in for the first time, it is recommended you change the default administrator
password. Click Management, Access Control and then Logins to display the next screen.
Figure 18 Change Administrator Login Password
4.4 Saving Your Configuration
When you are done modifying the settings in a screen, click Apply to save your changes back
to the run-time memory. Settings in the run-time memory are lost when the switch’s power is
turned off.
Click the Save link in the upper right hand corner of the web configurator to save your
configuration to nonvolatile memory. Nonvolatile memory refers to the switch’s storage that
remains even if the switch’s power is turned off.
Note: Use the Save link when you are done with a configuration session.
Cluster
Management
This link takes you to a screen where you can configure clustering management
and view its status.
MAC Table This link takes you to a screen where you can view the MAC addresses (and types)
of devices attached to what ports and VLAN IDs.
ARP Table This link takes you to a screen where you can view the MAC addresses – IP
address resolution table.
Configure Clone This link takes you to a screen where you can clone port attributes of a port and
transfer them to other port(s).
Table 5 Navigation Panel Links (continued)
LINK DESCRIPTION