Filter
Top Products
ES-2024 Series User’s Guide
Chapter 8 VLAN 82
8.5.2 VLAN Detail
Click an index number in the VLAN Status screen to display the VLAN Detail screen. Use this
screen to view detailed port settings and status of the VLAN group. Refer to Section 8.1 on
page 78 for more information on static VLAN.
Figure 35 VLAN Status: Detail
The following table describes the labels in this screen.
8.5.3 Configure a Static VLAN
To configure a static VLAN, click Static VLAN in the VLAN Status screen to display the
screen. Use this screen to configure and view 802.1Q VLAN parameters for the switch. Refer
to Section 8.1 on page 78 for more information on static VLAN.
Elapsed Time This field shows how long it has been since a normal VLAN was registered or a static
VLAN was set up.
Status This field shows how this VLAN was added to the switch; dynamic - using GVRP,
static - added as a permanent entry or other - added using Multicast VLAN
Registration (MVR).
Change Pages Click Previous or Next to show the previous/next screen if all status information
cannot be seen in one screen.
Table 14 VLAN: VLAN Status (continued)
LABEL DESCRIPTION
Table 15 VLAN Status: Detail
LABEL DESCRIPTION
VID This is the VLAN identification number that was configured in the Static VLAN
screen.
Port Number This column displays the ports that are participating in a VLAN. A tagged port is
marked as T, an untagged port is marked as U and ports not participating in a VLAN
are marked as “–“.
Elapsed Time This field shows how long it has been since a normal VLAN was registered or a static
VLAN was set up.
Status This field shows how this VLAN was added to the switch; dynamic - using GVRP,
static - added as a permanent entry or other - added using Multicast VLAN
Registration (MVR).